GEARX Logo Steel Bevel Gears with Setscrew 1:3

steel_bevel_gears
 Pressure angle  20°
 Material  080M40
 Heat treatment   -
 Tooth surface treatment   - 
 Gears surface treatment   - 
 Tooth surface finish  Milled
 Precision grade  DIN 8
THC Gear # Module  No. of
Teeth
PD OD d D F H h h1 h2 Screw Type
SB0.8-15-3 0.80 15 12.0 14.14 6 10 5.69 28 15.63 9.67 5.0 M3 T1
SB0.8-45-3 0.80 45 36.0 36.30 8 28 5.69 20 16.07 8.00 4.0 M3 T1
SB1-15-3 1.00 15 15.0 17.67 8 13 7.12 32 16.54 9.18 4.5 M4 T1
SB1-45-3 1.00 45 45.0 45.37 10 40 7.12 24 19.09 10.00 5.0 M4 T1
SB1.5-15-3 1.50 15 22.5 26.51 10 18 10.67 45 21.80 10.51 5.0 M4 T1
SB1.5-45-3 1.50 45 67.5 68.06 15 50 10.67 32 24.63 12.00 6.0 M4 T1
SB2-15-3 2.00 15 30.0 35.37 12 24 15.00 62 31.77 16.00 10.0 M5 T1
SB2-45-3 2.00 45 90.0 90.74 18 48 15.00 42 32.39 18.00 10.0 M5 T1
SB2.5-15-3 2.50 15 37.5 44.21 18 30 18.00 75 36.52 18.00 12.0 M6 T1
SB2.5-45-3 2.50 45 112.5 113.43 20 55 18.00 50 37.77 22.00 12.0 M6 T1
SB3-15-3 3.00 15 45.0 53.05 18 36 22.00 88 42.20 19.00 12.0 M6 T1
SB3-45-3 3.00 45 135.0 136.11 23 65 22.00 58 43.45 24.00 12.0 M6 T1
SB4-15-3 4.00 15 60.0 70.74 20 48 30.00 115 54.55 23.00 15.0 M8 T1
SB4-45-3 4.00 45 180.0 181.48 30 85 30.00 75 55.77 30.00 15.0 M8 T1
SB5-15-3 5.00 15 75.0 88.42 20 60 40.00 138 64.75 23.00 15.0 M8 T1
SB5-45-3 5.00 45 225.0 226.85 35 120 40.00 86 62.68 28.00 15.0 M10 T1
SB6-15-3 6.00 15 90.0 106.11 25 72 45.00 160 69.31 22.00 15.0 M10 T1
SB6-45-3 6.00 45 270.0 272.22 40 140 45.00 95 66.17 28.00 15.0 M10 T1
Note:
1.All dimensions are in mm.
2.Gears are also available in 14-1/2° pressure angle.

Racks | Cylindrical Gears | Bevel Gears | Worm and Worm Gears | Non Circular Gears
Home | Special Application Gears | Read Before InquireGear Info | Site Map
Tel: 86-10-6492-5308 | Fax: 86-10-6492-5744 | E-Mail "GEARX"

Remember to bookmark this web site for your future convenience!
Copyright by Beijing GEARX Limited. All rights reserved.