GEARX Logo Steel Bevel Gears with Setscrew 1:4

"
steel_bevel_gears
 Pressure angle  20°
 Material  080M40
 Heat treatment   -
 Tooth surface treatment   - 
 Gears surface treatment   - 
 Tooth surface finish  Milled
 Precision grade  DIN 8
THC Gear # Module  No. of
Teeth
PD OD d D F H h h1 h2 Screw Type
SB0.8-15-4 0.80 15 12.0 14.23 6 10 7.10 35 18.07 10.58 5.0 M3 T1
SB0.8-60-4 0.80 60 48.0 48.22 8 30 7.10 20 15.98 8.00 4.0 M3 T1
SB1-15-4 1.00 15 15.0 17.79 8 13 9.28 45 24.22 14.73 7.0 M4 T1
SB1-60-4 1.00 60 60.0 60.27 10 40 9.28 30 25.08 12.00 6.0 M4 T1
SB1.5-15-4 1.50 15 22.5 26.69 10 18 13.91 60 28.82 12.08 6.0 M4 T1
SB1.5-60-4 1.50 60 90.0 90.41 15 50 13.91 35 27.61 12.00 6.0 M4 T1
SB2-15-4 2.00 15 30.0 35.57 12 24 17.00 76 33.05 15.36 10.0 M5 T1
SB2-60-4 2.00 60 120.0 120.55 18 60 17.00 45 34.81 19.00 10.0 M5 T1
SB2.5-15-4 2.50 15 37.5 44.46 15 30 21.00 94 39.95 17.00 12.0 M6 T1
SB2.5-60-4 2.50 60 150.0 150.69 20 75 21.00 55 42.20 23.00 12.0 M6 T1
SB3-15-4 3.00 15 45.0 53.55 18 36 26.00 112 47.90 21.00 12.0 M6 T1
SB3-60-4 3.00 60 180.0 180.82 25 90 26.00 65 49.83 27.00 12.0 M6 T1
SB4-15-4 4.00 15 60.0 71.14 20 48 34.00 146 59.90 25.00 15.0 M8 T1
SB4-60-4 4.00 60 240.0 241.10 30 120 34.00 82 61.61 35.00 15.0 M8 T1
SB5-15-4 5.00 15 75.0 88.92 20 60 40.00 175 64.98 23.00 15.0 M8 T1
SB5-60-4 5.00 60 300.0 301.37 35 160 40.00 90 64.00 28.00 15.0 M10 T1
SB6-15-4 6.00 15 90.0 106.70 25 75 45.00 205 70.12 23.00 15.0 M10 T1
SB6-60-4 6.00 60 360.0 361.64 40 180 45.00 96 64.16 28.00 15.0 M10 T1
Note:
1.All dimensions are in mm.
2.Gears are also available in 14-1/2° pressure angle.

Racks | Cylindrical Gears | Bevel Gears | Worm and Worm Gears | Non Circular Gears
Home | Special Application Gears | Read Before InquireGear Info | Site Map
Tel: 86-10-6492-5308 | Fax: 86-10-6492-5744 | E-Mail "GEARX"

Remember to bookmark this web site for your future convenience!
Copyright by Beijing GEARX Limited. All rights reserved.