GEARX LogoSteel Hardened Teeth Racks with Machined Ends

steel_hardened_teeth_racks_with_machined_ends
 Pressure angle  20°
 Material  C45
 Heat treatment   -
 Tooth surface treatment  Induction hardened
 Rack surface treatment   -
 Tooth surface finish  Milled
 Precision grade  DIN 10
  Racks for continuous mounting
THC Rack # Module L B H h f No. of
teeth
Type Weight
(kg)
SR2-250HE 2 251.30 24 24 22 2 40 R1 1.00
SR3-250HE 3 254.50 29 29 26 2 27 R1 1.50
SR4-250HE 4 251.30 39 39 35 3 20 R1 2.60
SR5-250HE 5 251.30 49 39 34 3 16 R1 3.25
SR6-250HE 6 245.04 59 49 43 3 13 R1 4.83
 
SR2-500HE 2 502.65 24 24 22 2 80 R1 2.10
SR3-500HE 3 508.94 29 29 26 2 54 R1 3.00
SR4-500HE 4 502.65 39 39 35 3 40 R1 5.30
SR5-500HE 5 502.65 49 39 34 3 40 R1 6.90
SR6-500HE 6 508.94 59 49 43 3 40 R1 10.50
 
SR2-1000HE 2 1005.31 24 24 22 2 160 R1 4.20
SR3-1000HE 3 1017.88 29 29 26 2 108 R1 6.00
SR4-1000HE 4 1005.31 39 39 35 3 80 R1 10.2
SR5-1000HE 5 1005.31 49 39 34 3 64 R1 13.80
SR6-1000HE 6 1017.88 59 49 43 3 54 R1 21.00
 
SR2-2000HE 2 2010.62 24 24 22 2 320 R1 8.40
SR3-2000HE 3 2035.75 29 29 26 2 320 R1 12.00
SR4-2000HE 4 2010.62 39 39 35 3 160 R1 20.50
SR5-2000HE 5 2010.62 49 39 34 3 128 R1 27.50
SR6-2000HE 6 2035.75 59 49 43 3 108 R1 42.00
 Note:
 1.All dimensions are in mm. 

Racks | Cylindrical Gears | Bevel Gears | Worm and Worm Gears | Non Circular Gears
Home | Special Application Gears | Read Before InquireGear Info | Site Map
Tel: 86-10-6492-5308 | Fax: 86-10-6492-5744 | E-Mail "GEARX"

Remember to bookmark this web site for your future convenience!
Copyright by Beijing GEARX Limited. All rights reserved.