GEARX Logo Steel Racks with Machined Ends

steel_racks_with_machined_ends
 Pressure angle  20°
 Material  C45
 Heat treatment  Quenched and tempered
 Tooth surface treatment   -
 Rack surface treatment   -
 Tooth surface finish  Milled
 Precision grade  DIN 8
 Racks for continuous mounting
THC Rack # Module L B H h f No. of
teeth
Type Weight
(kg)
SR2-250E 2 251.32 25 24 22 2 40 R1 1.10
SR3-250E 3 254.47 30 29 26 2 27 R1 1.55
SR4-250E 4 251.32 40 39 35 2 20 R1 2.75
SR5-250E 5 251.32 49 39 34 3 16 R1 3.80
 
SR2-500E 2 502.65 25 24 22 2 80 R1 2.20
SR3-500E 3 508.94 30 29 26 2 54 R1 3.10
SR4-500E 4 502.65 40 39 35 2 40 R1 5.50
SR5-500E 5 502.65 49 39 34 3 32 R1 6.80
 
SR2-1000E 2 1005.31 25 24 22 2 160 R1 4.30
SR3-1000E 3 1017.88 30 29 26 2 108 R1 6.20
SR4-1000E 4 1005.31 40 39 35 3 80 R1 11.00
SR5-1000E 5 1005.31 49 39 34 3 64 R1 13.60
 
SR2-2000E 2 2010.62 25 24 22 2 320 R1 8.60
SR3-2000E 3 2035.75 30 29 26 2 216 R1 12.40
SR4-2000E 4 2010.62 40 39 35 3 160 R1 22.00
SR5-2000E 5 2010.62 49 39 34 3 128 R1 27.20
Note:
1.All dimensions are in mm.

Racks | Cylindrical Gears | Bevel Gears | Worm and Worm Gears | Non Circular Gears
Home | Special Application Gears | Read Before InquireGear Info | Site Map
Tel: 86-10-6492-5308 | Fax: 86-10-6492-5744 | E-Mail "GEARX"

Remember to bookmark this web site for your future convenience!
Copyright by Beijing GEARX Limited. All rights reserved.